Preface; Overview - ZOLL Propaq M Service Manual

Overview

ZOLL
biomedical technician whose responsibility is to identify malfunctions and/or make repairs at
the subassembly level. The Propaq M Service Manual has six main sections and two
appendixes.
Preface—Contains safety warnings and an overview of the manual's contents. Be sure to
review this section thoroughly before attempting to use or service the Propaq M unit.
Chapter 1—Maintenance Tests describes the Annual Calibration Tests for NIBP and EtCO
modules, Functional Tests that need to be run when a module has been repaired, and
Operational Tests that need to be performed at regular intervals to augment the automatic
testing the Propaq M does to ensure readiness.
Chapter 2—Troubleshooting provides a listing of error messages to help the service
technician detect faults and repair them.
Chapter 3—Disassembly Procedures describes step-by-step procedures for removing
subassemblies from the Propaq M unit.
Chapter 4—Life Cycle Counters describes step-by-step procedures for setting life cycle
counters after replacing modules in the Propaq M unit.
Chapter 5—Replacement Parts List displays a complete list of ZOLL part numbers for field
replaceable parts available for the Propaq M unit, allowing the service person to identify and
order replacement parts from ZOLL.
9650-0804-01 Rev. A
®
Medical Corporation's Propaq
ZOLL Propaq M Service Manual
®
M Service Manual is intended for the trained

Preface

2
1