ZOLL Propaq M Service Manual page 28

C 1 M
HAPTER AINTENANCE
Heart Rate Display Test
ECG simulator
Tools Needed
ECG Cable (3-lead, 5-lead or 12-lead)
Press the power switch to turn on the Propaq M. Press Lead quick access key until II displays.
Test Setup
Connect the ECG leads to the ECG simulator.
Connect the ECG cable to the unit.
Do this...
1. Set the ECG Simulator to 120BPM.
24
T
ESTS
Observe this...
The Heart Rate displays as 120 +/- 4 bpm
Pass/Fail
o o
9650-0804-01 Rev. A