Setup Interface To Dji Autopilot - UGCS SkyHub User Manual

Setup Interface to DJI Autopilot

Home directory
for root user
MicroSD root
Configuration file
Logs directory
Setup Interface to DJI Autopilot
To allow the UgCS SkyHub to connect to the DJI autopilot, one should activate and setup the
Onboard SDK for its device, and setup the UgCS for DJI mobile application.
DJI User's Credentials Registration
One needs to create and use own credentials for the DJI flight controller activating. Please,
follow the steps described below.
1. Create an account on
developer area.
2. Choose the ONBOARD SDK option from the drop-down list and press the
CREATE APP button.
3. Enter corresponding information and press the CREATE button.
Copyright © 2019—2022, SPH Engineering
UgCS SkyHub 2
/home/root/
/run/media/mmcblk1p1/
/etc/skyhub/skyhub.conf
/run/media/mmcblk1p1/sk
yhub_logs/
https://developer.dji.com/
Figure 3.2 — DJI Developer area
Table 3.1 — Onboard File System
UgCS SkyHub 3
/root/
/etc/skyhub/skyhub.conf
/data/skyhub_logs/
then enter to Apps tab in the
24
UgCS SkyHub User Manual
Revision 6 • February 2022