SMART Board MX Series Installation And Maintenance Manual page 78

Appendix A Adjusting iQ settings
Option
Go to energy saving
mode after
Standby (Shutdown)
Networked Standby
(Sleep)
External Inputs
smarttech.com/kb/171555
Values Function
Disabled Sets the number of minutes of
inactivity before the display enters
1 min
an energy saving mode.
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
[N/A] If selected, the display will turn off all
running components to achieve
maximum energy savings but wakes
up slower.
[N/A] If selected, the display wakes up
faster and can be turned on up by a
Wake on LAN command from the
network.
Notes User or system
setting
The default is 60 System
minutes.
This option is not
available for
SMART Board
MX series
displays.
This option is System
more energy
efficient.
This option is the
default for
displays in the
EU.
For information
about the
display's energy
saving modes,
see About
energy saving
modes on
page 33.
This option is not
available for
SMART Board
MX series
displays.
This option is less System
energy efficient.
This option is the
default for
displays not in
the EU.
For information
about the
display's energy
saving modes,
see About
energy saving
modes on
page 33.
This option is not
available for
SMART Board
MX series
displays.
78