SMART Board MX Series Installation And Maintenance Manual page 27

Chapter 2 Installing the display
Mount the display vertically (90° relative to the floor plus or minus 2° for tolerance) and in landscape
l
orientation. SMART doesn't support mounting the display at other angles or in portrait orientation.
Use the included wall mount. Optionally, use a VESA-approved mounting plate that is rated for the
l
display's weight and size.
If you're not using the included bolts to fasten the wall mount to the display, see the following table.
l
Display
SMART Board MX (V2, V2-C, and V3) series
55" models
65" models
75" models
86" models
SMART Board MX series
65" models (Part No. 1031028)
65" models (Part No. 1033445)
75" models
86" models
where x is the combined thickness of the wall mount and washer
smarttech.com/kb/171555
Bolt type Minimum length
M8 14 mm + x mm
M8 14 mm + x mm
M8 18 mm + x mm
M8 14 mm + x mm
M6 14 mm + x mm
M8 14 mm + x mm
18 mm + x mm
M8
M8 14 mm + x mm
Maximum length
20 mm + x mm
18 mm + x mm
30 mm + x mm
30 mm + x mm
18 mm + x mm
18 mm + x mm
30 mm + x mm
30 mm + x mm
27