SMART Board MX Series Installation And Maintenance Manual page 62

Chapter 4 Maintaining the display
If the display is connected to a computer and the pointer appears a distance from the actual contact
when you touch the screen, orient the display.
Note
You can use your finger or a pen to orient the display.
To orient the display when connected to a computer
1. Open SMART Settings.
Operating
system
®
Windows 10
Windows 8
Windows 7
macOS
2. Tap Orient.
3. Tap the red targets as they appear. Hold your finger or the tip of the pen at the center of each
target, and then lift the pen or finger. When you lift the pen or finger, the target moves to the next
orientation point.
Important
Hold the pen at a right angle to the screen.
4. Continue until you've pressed all the targets.
The orientation window closes.
smarttech.com/kb/171555
Procedure
a. Select Start.
b. Scroll to and select SMART Technologies > SMART Settings.
a. Open the Apps screen.
b. Scroll to and select SMART Technologies > SMART Settings.
Select Start > All Programs > SMART Technologies >
SMART Tools > SMART Settings.
a. Press
on the Mac menu bar.
b. Press SMART Settings.
62