SMART Board MX Series Installation And Maintenance Manual page 52

Chapter 3 Connecting computers and other devices
No. Connector
1 HDMI 1.4 out (HDCP-
compliant)
2 USB 2.0 Type-A
connector
3 USB 2.0 Type-A
connector
4 HDMI 1 2.0 in
5 HDMI 2 2.0 in
6 RJ45 (×2)
7 USB 2.0 Type-B
8 RS-232
9 Stereo 3.5 mm out
10 S/PDIF out
11 Stereo 3.5 mm in
12 VGA in
smarttech.com/kb/171555
Connects to
External monitor
Supported USB drives,
peripherals, and other
devices
Supported USB drives,
peripherals, and other
devices
HDMI 1 input
(video and audio)
HDMI 2 input
(video and audio)
Network
HDMI 1, HDMI 2, or VGA input
(touch)
Room control system
External audio system
Digital audio output
VGA input (audio)
VGA input (video)
Notes
This connector is HDCP-encrypted
HDMI.
Note
HDMI out is an optional feature.
Contact your authorized SMART
reseller (smarttech.com/where)
for further ordering instructions.
Connect a USB drive to update the
display's firmware.
Note
If troubleshooting an issue with
the display, connect a USB
mouse to navigate the display's
on-screen menu.
See page 43 and USB cables and
connectors.
See page 36 and HDMI cables
and connectors.
See page 36 and HDMI cables
and connectors.
See page 29 and Ethernet
(network) cables and connectors.
See page 36 and USB cables and
connectors.
See page 94 and RS-232 cables
and connectors.
See page 45 and Analog audio
cables and connectors.
See page 45 and Digital audio
cables and connectors.
See page 36 and Analog audio
cables and connectors.
See page 36 and VGA cables and
connectors.
52