Troubleshooting - Maxx Ice MIM150N Service, Installation, And Instruction Manual

Automatic commercial ice cube machine

Hide thumbs

Table Of Contents

Table of Contents

ICE BRIDGE SIZE ADJUSTMENT GUIDE:

Press and hold the "ADJUST" button for at least 3 seconds The unit will enter the Ice Size

Adjustment mode and the words "Ice Adjust" display on the LCD Screen.

While in the Ice Size Adjustment mode, press the "Clean" button or the "Mode" button for the

desired ice size.

SMALLER ICE SETTING:

By pressing the "Clean" button, you can decrease the size of the ice bridge. The words of "-6

Minutes" indicate the smallest ice size.

LARGER ICE SETTING:

By pressing the "Mode" button, you can increase the size of the ice bridge. The words of "+10 Minutes"

indicate the largest ice size. After 10 seconds without any operation, the unit will automatically

memorize the current state and return to the previous mode.

NOTE:

• If during the ice size adjustment mode the words of "Ice Adjust" and "0 Minute" display on the LCD

screen, this indicates that the unit is in the regular (middle) setting of the ice size.

• When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode cannot be

accessed.

IMPORTANT:

• The ice bridge adjustment has been set at the factory for optimum performance and it is not

recommended for a user to make this adjustment. This ice adjustment procedure should be made

only by an authorized service technician.

IMPORTANT:

• Although the unit has been tested and cleaned at the factory, due to long-term transit and storage,

the first batch of cubes must be discarded.

• Never turn the water supply tap off when the ice maker is working.

• Never touch the evaporator when the machine is running.

• Keep the door closed as much as possible to reduce melting and insure proper ice formation.

IMPORTANT:

• Avoid letting water contact the control box