How To Disable The Datashur Sd Bootable Feature; How To Check The Bootable Setting - iStorage DATASHUR SD Manual

37. How to disable the datAshur SD Bootable feature

To disable the datAshur SD Bootable Feature, first enter the Admin Mode as described in section 5. Once the drive is in
Admin Mode (solid BLUE
1. In Admin Mode, press and hold down both
KEY ( ) + 9 buttons
2. Press "0" followed by another "0" (00)
3. Press the SHIFT ( ) button once
Note: When the datAshur SD is in Admin Mode, the
during which time the drive can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the datAshur SD will exit Admin Mode automatically - the solid
BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
(data), the datAshur SD must first be in the Idle State (all LEDs off) before an Admin/User PIN can be entered.

38. How to check the Bootable setting

To check the bootable setting, first enter the Admin Mode as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin Mode press and hold down both
SHIFT ( ) + 9 buttons
2. Press the KEY ( ) button and one of the following two scenarios will happen:
• If datAshur SD is configured as Bootable, the following happens:
a. All LED's (RED, GREEN
b. GREEN LED blinks once.
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
• If datAshur SD is NOT configured as Bootable, the following happens:
a. All LED's (RED, GREEN
b. All LEDs are off
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
LED) proceed with the following steps.
RED LED which then fades out to the Idle State (all LEDs off).
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle State. To access the drive contents
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
www.istorage-uk.com
Solid BLUE
and BLUE
GREEN and
Blinking
a solid GREEN
LED indicating the bootable feature has been
successfully disabled
BLUE LED will remain on and solid for 30 seconds only,
Solid BLUE
and BLUE
LED will change to blinking
LEDs
BLUE LEDs will continue to blink
GREEN and BLUE LEDs will change to
LED and finally to a solid
) button for a second - the
LED will change to blinking
LEDs
GREEN
BLUE
GREEN
#29