Set Global Read-Only In Admin Mode; Enable Global Read/Write In Admin Mode - iStorage DATASHUR SD Manual

Note:
When the datAshur SD is in Admin Mode, the
during which time the drive can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the datAshur SD will exit Admin Mode automatically - the solid
BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
(data), the datAshur SD must first be in the Idle State (all LEDs off) before an Admin/User PIN can be entered.

21. Set Global Read-Only in Admin Mode

When the Administrator configures the datAshur SD and restricts it to Global Read-Only, then neither the Administrator nor
the User can write to the drive and both are restricted to Read-Only access. Only the Administrator is able to change the
setting back to Read/Write as described in section 22.
To set the datAshur SD and restrict Global access to Read-Only, first enter the Admin Mode as described in section 5. Once
the drive is in Admin Mode (solid
1. In Admin Mode, press and hold down both "5 + 6"
buttons.
2. Press KEY ( ) button
Note: When the datAshur SD is in Admin Mode, the
during which time the drive can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the datAshur SD will exit Admin Mode automatically - the solid
BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
(data), the datAshur SD must first be in the Idle State (all LEDs off) before an Admin/User PIN can be entered.

22. Enable Global Read/Write in Admin Mode

To set the datAshur SD back to Read/Write from the Global Read-Only setting, first enter the Admin Mode as described in
section 5. Once the drive is in Admin Mode (solid
1. In Admin Mode, press and hold down both "5 + 9"
buttons.
2. Press KEY ( ) button
BLUE
RED LED which then fades out to the Idle State (all LEDs off).
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle State. To access the drive contents
BLUE LED) proceed with the following steps.
BLUE
RED LED which then fades out to the Idle State (all LEDs off).
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle State. To access the drive contents
BLUE LED) proceed with the following steps.
www.istorage-uk.com
LED will remain on and solid for 30 seconds only,
Solid BLUE LED will change to blinking
and BLUE LEDs
GREEN and BLUE
GREEN LED and then to a solid
indicating the drive has been configured and
restricts Global access to Read-Only
LED will remain on and solid for 30 seconds only,
Solid BLUE LED will change to blinking
and BLUE LEDs
GREEN and BLUE
GREEN LED then to a solid
indicating the drive is configured as Read/Write
) button for a second - the
GREEN
LEDs will change to a solid
BLUE LED
) button for a second - the
GREEN
LEDs change to a solid
BLUE LED
#19