Setting The Unattended Auto Lock Feature - iStorage diskAshur DT User Manual

14. Setting the Unattended Auto Lock Feature

To protect against unauthorized access if the drive is unlocked and unattended, the diskAshur DT can be set to automatically
lock after a pre-set amount of time.
In its default state, the diskAshur DT Unattended Auto Lock feature is turned off. The Unattended Auto Lock can be set to
activate after 5, 10 or 20 minutes.
To set the Unattended Auto Lock please use the following steps:
#12
1. Enter the Admin mode by pressing and holding
the LED indicator light flashes RED. This indicates that you can enter the
Admin PIN.
2. Enter the Admin PIN and press
LED indicator light has changed to BLUE.
3. Once in Admin mode, press
should start flashing RED
4. Press one of the numbers below that corresponds to amount of time you would
like the drive to lock after no activity:
Auto Lock Timeout Table:
1 = 5 min
2 = 10 min
3 = 20 min
0 = OFF
The default is 0 (OFF)
5. After you have input the number, the LED indicator light should flash
GREEN 3 times to indicate that you have successfully set the Unattended Auto
Lock feature.
+ 0 for five seconds until
. The drive is in Admin Mode when the
+ 6. The LED indicator lights
and BLUE intermittently.
www.istorage-uk.com