How To Disable The Datashur Pro Bootable Feature; How To Check The Bootable Setting - iStorage DATASHUR PRO2 User Manual

37. How to disable the datAshur PRO
To disable the datAshur PRO
Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down both
KEY ( ) + 8 buttons
2. Press "0" followed by another "0" (00)
3. Press the SHIFT ( ) button once
Note: When the datAshur PRO
time the drive can accept instructions via the keypad allowing it to be configured with a host of security features. If no key event
happens within 30 seconds, the datAshur PRO
RED LED which then fades out to the Idle state (all LEDs off).
To immediately exit Admin Mode (solid
LED switches to a solid
must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.

38. How to check the Bootable setting

To check the bootable setting, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
LED) proceed with the following steps.
1. In Admin mode press and hold down both
SHIFT ( ) + 8 buttons
2. Press the KEY ( ) button and one of the following two scenarios will happen;
• If datAshur PRO is configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN
b. GREEN LED blinks once.
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
• If datAshur PRO is NOT configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN
b. All LEDs are off
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
#30
Bootable Feature, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin
2
is in Admin Mode, the
2
will exit Admin mode automatically - the solid
2
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle state. To access the drive contents (data), the datAshur PRO
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
Bootable feature
2
Solid
BLUE
GREEN
Blinking
solid
indicating the bootable feature has been successful-
ly disabled
BLUE LED will remain on and solid for 30 seconds only, during which
Solid
BLUE
www.istorage-uk.com
BLUE LED will change to blinking
LEDs
and BLUE LEDs will continue to blink
GREEN and BLUE LEDs will change to a
GREEN LED and finally to a solid
BLUE LED switches to a solid
) button for a second - the solid
BLUE LED will change to blinking
LEDs
GREEN and
BLUE LED
BLUE
2
BLUE
GREEN and