2. Connecting the diskG ........................ 6 3. Connecting the diskG with USB Y-Cable ................... 7 4. How do I use the diskG the first time? ..................7 5. What if I forget the User PIN? ....................7 6. Entering the Standby Mode ....................... 8 7.
The iStorage diskG Secure Drive is the ultimate portable hard drive and secure storage system. With an easy-to use keypad design and software free setup, the diskG enables you to securely access the drive with your own unique PIN. Featuring your choice of 128-bit or 256-bit hardware encryption and a fast USB 2.0 connection, the diskG provides seamless real-time encryption, keeping your data safe even if the hard drive is removed from its enclosure.
• Return to the previous step when you knowingly entered a wrong PIN • Exit the Admin Mode button can be used to access the diskG and it can also be used as an OK acknowledgement in the following operations: •...
Be sure to review the following information before you begin to use the diskG. Caution: Use only the included cables with your diskG. You might damage the drive if you use a cable not included with the diskG. 2. Connecting the diskG 1.
Caution: If you forget or lose your ADMIN PIN there is no way to access the drive. Even an iStorage employee will be unable to help you access your data. In the event that this happens, the only way to use the drive is to do a complete reset, which will reset the encryption key making all data on the drive unrecoverable and restore the diskG to the default Admin PIN 123456.
PIN. 8. Exiting the User Mode To exit the User Mode, press the “Cancel” button on the diskG keypad. If there is no activity for 5 seconds the drive will lock and go into Standby mode.
Note: The diskG cannot be recognized by the operating system in the Admin Mode. To enter the Admin Mode, do the following: 1. Attach the USB cable to an available USB port on your computer. The diskG goes into the Standby Mode, and the LED indicator light turns RED.
• You waited longer than 10 seconds before entering a PIN. • The new PIN was entered incorrectly. 2. If no activity is detected within two minutes in the Admin Mode, the diskG will return to the Standby Mode. www.istorage-uk.com...
6 digits and a maximum of 16 digits). The LED indicator light will flash GREEN three times. 5. Immediately re-enter the new User PIN and press . The LED indicator light will stay solid GREEN indicating that the User PIN has been changed successfully. www.istorage-uk.com...
To protect against unauthorized access if the drive is unlocked and unattended, the diskG can be set to automatically lock after a pre-set amount of time. In its default state, the diskG Unattended Auto Lock feature is turned off. The Unattended Auto Lock can be set to activate after 5, 10 or 20 minutes.
Accordingly, one definition of “breaking” a cryptographic scheme is to find a method faster than a brute force attack. How does the diskG protect against brute force attack? 1. With the drive locked and in the standby state the LED indicator light will be solid RED.
17. Setting a Self Destruct PIN The diskG has the ability to set a PIN that will reset the encryption key if needed. By resetting the encryption key all data on the drive will be lost and cannot be recovered.
PINs, and restore the Admin PIN to the default 123456. Attention: Completely resetting the diskG will reset the encryption key, in effect making all the data on the drive unrecoverable. You will need to partition and format the diskG with disk management applications.
Page 16
In the Computer Manage window, click Disk Management. In the Disk Management window, the diskG is recognized as an unknown device that is uninitialized and unallocated. Note: If the Initialize Disk Wizard window opens, click Cancel. Right-click Unknown Disk, and then select Initialize Disk.
14. Wait until the format process is complete. The diskG will be recognized and it is available for use. 20. Hibernating, Suspending, or Logging off from the Operating Sys tem Be sure to save and close all the files on your diskG before hibernating, suspending, or logging off from the Windows operating system.
There is no other way to retrieve the Admin PIN except a complete reset of the diskG. After a complete reset, all data will be lost and you will need to initialize, allocate and format the diskG manually. Then you will be able to use the default Admin PIN 123456.
The issue you are having is being caused by power saving settings on your PC or Laptop so please see below and make the appropriate changes to your computer and this will stop the diskG from locking as when your computer is power saving it switches off data to the USB ports and our products see that as `Disconnect` and are designed to lock when this is detected.
Page 20
Apple Mac The diskG keeps locking after 5-10 minutes on the Macs – This will be due the Mac’s power saving as there is a setting to switch off hard drives that are idle after a fix period of time see below;...
Page 21
The diskG will not power on when connected to my computer? This only happens when the computer the diskG is connected to cannot provide enough power from the USB port to power the drive. This issue only appears on much older computers and/or imbedded systems like USB enabled medical equipment.
DAMAGED OR RENDERED DEFECTIVE: 1. AS A RESULT OF ACCIDENT, MISUSE, NEGLECT, ABUSE OR FAILURE AND/OR INABILITY TO FOLLOW THE WRITTEN INSTRUCTIONS PROVIDED IN THIS INSTRUCTION GUIDE: 2. BY THE USE OF PARTS NOT MANUFACTURED OR SOLD BY ISTORAGE; 3. BY MODIFICATION OF THE PRODUCT; OR 4. AS A RESULT OF SERVICE, ALTERNATION OR REPAIR BY ANYONE OTHER THAN ISTORAGE AND SHALL BE VOID.