How To Disable The Datashur Pro Bootable Feature; How To Check The Bootable Setting - iStorage datAshur Pro2 User Manual

37. How to disable the datAshur PRO
To disable the datAshur PRO
Admin Mode (solid BLUE
1. In Admin mode, press and hold down both
KEY ( ) + 8 buttons
2. Press "0" followed by another "0" (00)
3. Press the SHIFT ( ) button once
Note: When the datAshur PRO
during which time the drive can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the datAshur PRO
solid BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
(data), the datAshur PRO

38. How to check the Bootable setting

To check the bootable setting, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both
SHIFT ( ) + 8 buttons
2. Press the KEY ( ) button and one of the following two scenarios will happen;
• If datAshur PRO is configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN
b. GREEN LED blinks once.
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
• If datAshur PRO is NOT configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN
b. All LEDs are off
c. All LED's (RED, GREEN
d. LEDs return to solid BLUE
Bootable Feature, first enter the "Admin Mode" as described in section 5. Once the drive is in
2
LED) proceed with the following steps.
is in Admin Mode, the
2
RED LED which then fades out to the Idle state (all LEDs off).
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle state. To access the drive contents
must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.
2
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
www.istorage-uk.com
Bootable feature
2
Solid BLUE
and BLUE
GREEN and
Blinking GREEN
a solid GREEN
LED indicating the bootable feature has been
successfully disabled
BLUE LED will remain on and solid for 30 seconds only,
will exit Admin mode automatically - the
2
Solid BLUE
and BLUE
LED will change to blinking
LEDs
BLUE LEDs will continue to blink
and BLUE LEDs will change to
LED and finally to a solid
) button for a second - the
LED will change to blinking
LEDs
GREEN
BLUE
GREEN
#29