Probe; Connection; Power On/Off - Kanomax 1590 User Manual

Probe

Connection

No.
Hub unit-to-hub unit
1
communication terminal

Power ON/OFF

Power is supplied from the connected hub unit.
Turn on the power to the main unit connected to the hub unit.
After a short period of time, the measurement setup screen appears, and the power of the
probe is turned on.
The power of the probe is turned off when the power of the hub unit is turned off or the AC
adapter of the power source is disconnected.
50 4. User Interface
1
Name
Using the standard cable (optionally available),
connect
communication terminal of the hub unit to be
connected.
The available standard cable (optionally available) can
be selected from 0.5 m, 2.0 m, 5.0 m, 10.0 m, 20.0
m and 40.0 m.
Probe converter box
How to connect
this terminal to the probe-to-probe