Analog Unit; Connection - Kanomax 1590 User Manual

Analog Unit

Connection

1
4
No.
Analog output terminal
1
(1 to 12CH)
Unit-to unit
2 communication
terminal
2
3
Name
Using the dividing terminal block (accessory), connect
this terminal to a device to be connected such as a
data logger.
For details, refer to 2. Getting Ready to Measure >
Connecting the units.
Using the standard cable (optionally available),
connect this terminal (UP) to the unit-to-unit
communication terminal (DOWN) of the unit to be
connected.
For details, refer to 2. Getting Ready to Measure >
Connecting the units.
UP
The available standard cable (optionally available) can
be selected from 0.5 m, 2.0 m, 5.0 m, 10.0 m, 20.0
m and 40.0 m.
If the connecting connector (plug) has already been
used to connect to another unit, do not use this
terminal.
5
How to connect
4. User Interface 47