Yamaha DT200L 1984-1988 Service Manual page 109

WATER PUMP
COOL
Oil Seal Replacement
1. Remove:
• Oil seal
Top off it from the crankcase cover.
2. Apply:
• Lightweight lithium base grease.
Apply a light coating of grease to oil
seal lips.
3. Install:
• Oil seal
NOTE:
Install the oil seal with the "WATER SIDE" mark
is on the inside.
^
^". .
0
0°
©
NOTE:
Press-fit the oil seal until they contact the bot-
torn.
/>0% 0
^3
^
Q ®
o0
'' o
0
Assembly
1. Apply:
• Lightweight lithium base grease
Apply a grease to oil seal and impeller
shaft.
2. Install:
• Impeller shaft
Install the shaft while turning it.
NOTE:
Take care so that the oil seal lip is not damaged
or the spring does not slip off its position.
4-6