Yamaha DT200L 1984-1988 Service Manual page 82

ENG
ENGINE ASSEMBLY AND ADJUSTMENT
Shifter and Transmission
1. Install:
• Balancer weight
• Transmission assembly
NOTE:
WhiJe installing the drive axle into the crankcase,
pay careful attention to the oil seal Iip.
A recommended practice is to fit the 0-ring
and apply grease over the fitted area.
2. Check:
• Transmission operation
Unsmooth operation -»Repair
3. Install:
• Shift cam (D
• Shift forks
• Guide bars
v
NOTE:
Each shift forks is identified by a number cast on
its side. All the numbers should face the left side.
4. Check:
• Shifter operation
Unsmooth operaion- "Repair.
3-30