Yamaha DT200L 1984-1988 Service Manual page 201

SIGNAL SYSTEM
ELEC
5. "OIL" warning indicatot- light does not work
Check for voltage (12V) on "Br" lead at
indicator light connector.
OK
No voltage
Wiring circuit from fuse to
indicator light connector is
faulty, repair.
Check for voltage (12V) on "B/R" lead
at oil level switch connector.
No voltage
Indicator light bulb is
faulty, replace.
OK
Check for condition of oil level
switch.
Poor
condition
Oil level switch is faulty,
replace.
CD
(S)
ffijRNl
[HORN I
Switches Inspection
Switches may be checked for continuity with a
Pocket Tester (90890-03104) on the "Ohm x 1"
position.
® "LIGHTS" (Dimmer) switch
"TURN" switch
(3) "HORN" switch
C4) "LIGHTS" switch
y
'"ENGINE STOP" switch
7-27