Yamaha DT200L 1984-1988 Service Manual page 39

INSP
REAR SHOCK ABSORBER ADJUSTMENT ADJ
/"
Standard Length (Installed):
198 mm (7. 8 in)
Minimum Length (Installed):
188 mm (7. 4 in)
Maximum Length (Installed):
208 mm (8. 2 in)
Use a Special Wrench (1).
NOTE:
One complete turn of the adjuster will change
the preload 1 mm (0. 04 in). Make changes in in-
crements of 2 mm (0. 08 in) at a time.
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
c. Tighten:
• Locknut
55 Nm (5.5 m-kg, 40 ft-lb)
Always tighten the locknut against the
spring adjuster and torque the locknut to
specification.
2. Damping
NOTE:
The damping of the rear shock absorber can be
adjusted to suit rider's pre ference, weight, and
course conditions.
a. Adjust
• Damping
Turn the adjuster (1) to increase or
decrease the damping.
Decrease damping
@) Increase damping
2-24