Yamaha DT200L 1984-1988 Service Manual page 185

^J
0^700
IGNITION SYSTEM
ELEC
3. Connect:
• Pocket Tester (90890-03104)
Set the tester selector to "Ohm x 100"
position.
4. Measure:
• Pick-up coil resistance
Out of specification — Replace.
CD White/Red
White/Green
B
Pick-up Coil Resistance:
350 [2 ± 20% at 20°C (68°F»
Source Coil Resistance
1. Remove:
• Fuel tank
2. Disconnect:
•n-&
d)
^
• 2-pin connector (Brown and Black)
(from CDI magneto)
• One lead (Black/Red) (from CD)
magneto)
3. Connect:
• Pocket Tester (90890-03104)
Set the tester selector to "Ohm x 100"
position.
4. Measure:
• Source coil resistance
Out of specification — Replace.
(D Brown
Black/Red
Source Coil Resistance:
355 B ± 20% at 20°C (68°F)
7-11