Requirements; Installation And Setup - Mitel 6867i User Manual

• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependent on your phone system or service provider.

REQUIREMENTS

The 6867i requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for
the 6867i phone
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets
Layer (SSL) (HTTPS)
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps]
recommended)
• Category 5/5e straight-through cabling (Category 6 straight-through cabling required for
optimum Gigabit Ethernet performance)
• Power source:
- For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an
Ethernet cable to connect from the phone directly to the network for power (no 48V
AC power adapter required if using Power-over-Ethernet [PoE])
- For Ethernet networks that DO NOT supply power to the phone use only the GlobTek
Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848 (sold separately)
to connect from the DC power port on the phone to a power source or use a PoE power
injector or a PoE switch

INSTALLATION AND SETUP

If your System Administrator has not already set up your 6867i phone, please refer to the Mitel
6867i Installation Guide for basic installation and physical setup information.
Introduction
Mitel | 2