Call History Key - Mitel 6867i User Manual

The following table describes the key and Message Waiting Indicator (MWI) LEDs when Call
Forward is enabled on the IP phone.
KEY LED BEHAVIOR FOR ALL MODES (LEFT
SOFTKEYS ONLY)
Call Forward key LED
mode is enabled for the account in focus.
Call Forward key LED off if all Call Forward modes
are disabled for the account in focus.
Once Call Forward is enabled on your phone, you can access the Call Forward menus by
pressing a pre-configured Call Forward key, or by selecting Options > Call Forward from the
IP phone UI.
1. Press the configured Call Fwd softkey or press
option and press the
2. Enter forwarding numbers using the dialpad keys for any of the following states:
- All: Forwards all incoming calls to the specified number.
- Busy: Forwards incoming calls to a specified number if DND has been enabled OR if
the phone is currently engaged in another call.
- No Answer: Forwards incoming calls to a specified number if the call has not been
answered for the specified number of rings.
Notes: Pressing the 2 navigation key moves the selection to the next field/checkbox.
If All and Busy and No Answer are all enabled (and/or DND is enabled), the All settings
take precedence over Busy and No Answer.
Pressing the CopyToAll key copies the call forward number of the Call Forward mode
in focus to every Call Forward mode. For example, if you have the cursor pointing at the
All state and has a call forward phone number configured, pressing the CopytoAll key
assigns the same phone number to the Busy and No Answer states as well.
3. If configuring a forwarding number for the No Answer state, navigate to the No. Rings field
and press the 3 or 4 navigation keys to change the desired number of rings.
4. Using the 2 navigation key, move to the On checkbox beside the respective Call Forward
mode and press the
5. Press the Save softkey to save your changes.

CALL HISTORY KEY

In addition to the Received Callers List and Outgoing Redial keys, your System Administrator can
configure a Call History key on the phone. When pressed, the Call History key will directly access
the list of all calls in the Call History, as shown in the following figure.
RED if any Call Forward
button or Select softkey.
button to enable the Call Forward mode.
MWI LED BEHAVIOR FOR ALL MODES
MWI LED on if any Call Forward mode is
enabled for the account in focus.
MWI LED off if all Call Forward modes are
disabled for the account in focus.
, navigate to the Call Forward
IP Phone Keys
Mitel | 60