W
ELCOME
*Availability of feature dependent on your phone system or service provider.
** The 6930L and 6930Lt IP Phone variants do not contain Bluetooth circuitry and so do not support the
related wireless functions. Any information within this document related to radio performance or function-
ality only relates to the fully functional 6930 IP Phone with Bluetooth capability.
Requirements
The 6930 requires the following environment:
SIP-based IP PBX system or network installed and running with a SIP account created for the 6930
•
phone
Access to a Trithroughl File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer
•
Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS)
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended)
•
Category 5/5e straight-through cabling (Category 6 straight-through cabling required for opti-mum
•
Gigabit Ethernet performance)
Power source:
•
For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet cable to
•
connect from the phone directly to the network for power (no 48V AC power adapter required if using
Power-over-Ethernet [PoE])
For Ethernet networks that DO NOT supply power to the phone:
•
Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848(sold
–
separately) to connect from the DC power port on the phone to a power source or
Use a PoE power injector or a PoE switch
–
Installation and Setup
If your System Administrator has not already setup your 6930 phone, please refer to the Mitel 6930
Installation Guide for basic installation and physical setup information. For more advanced administra-
tion and configuration information, System Administrators should refer to the Mitel SIP IP Phones
Administrator Guide .
R
EQUIREMENTS
4