Blf/Xfer; Blf/Xfer Key Requirements And Functionality; Configuring A Blf/Xfer Key Using The Mitel Web Ui - Mitel 6920w User Manual

C S
ONFIGURING OFTKEYS
In the Type field, select Call Fwd.
3.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
4.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
5.
In the Type field, select Call Fwd.
6.
Click Save Settings.
7.

BLF/Xfer

: BLF/Xfer functionality can only be programmed on the left softkeys.
NOTE
The BLF key allows one or more extensions to be monitored, and once there is any state change with
those extensions, the key shows the status of the monitored lines. The Transfer key allows a call to be
transferred to other recipients blindly or consultatively. The BLF/Xfer key combines the BLF and
Transfer keys' functionality together allowing the user to transfer calls or use BLF with one key.
: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using
NOTE
the BLF/Xfer feature. For more information about this parameter, see

BLF/Xfer Key Requirements and Functionality

BLF/Xfer and BLF: A BLF/Xfer key can be configured for subscribing to an extension and monitor the
•
status of the extension, similar to the BLF key functionality. Changes of the state of the monitored
extension are indicated by the key's graphical button image as well as the key's LED.
BLF/Xfer and Blind Transfer Calls: When the focused line is in the connected state, pressing the
•
BLF/Xfer key transfers the call to the extension unconditionally, disregarding the status of the moni-
tored extension.
If transferring a call to an extension fails, a message Transfer Failed displays on the phone, and you can
reconnect the call (get the call back) by pressing the line key again.
BLF/Xfer and Call Forward: When the focused line is in the ringing state, pressing the BLF/Xfer key
•
forwards the call to the extension unconditionally, disregarding the status of the monitored extension.
BLF/Xfer and Speed Dial: When the focused line and the monitored extension are idle, pressing the
•
BLF/Xfer key causes the phone to go offhook and dial the number of the extension.

Configuring a BLF/Xfer Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
"Switch UI Focus to Ringing Line"
BLF/X
FER
.
96