Flash; Icom (Intercom) - Mitel 6867i User Manual

6867i User Guide for Clearspan
6. Press the Save key to save your changes.
The idle screen status bar displays the Call Forward icon and the MWI and (if configured) Call
Forward softkey LEDs is lit indicating Forward Filtering is activated.
Use the following procedure to deactivate call forwarding for filtered calls:
1. Press the Options key and then navigate to the Call Forward menu or press the Call
Forward softkey.
2. Press the navigation key to move to the On checkbox beside the Forward Filtering number
field.
3. Press the Select button.
The checkmark is removed indicating call forwarding of all filtered calls is to be deactivated.
4. Press the Save key to save your changes.
The Call Forward icon is removed from the idle screen status bar and the MWI and (if configured)
Call Forward softkey LEDs turns off indicating Forward Filtering is deactivated.
Initiate a Call on Behalf of an Executive
Use the following procedure to initiate a call on behalf of an Executive:
1. Press the Speeddial softkey programmed with Initiate Call function (e.g. "Init").
The phone enters in the FAC for the Clearspan Executive-Assistant Initiate Call feature and
automatically dials the FAC call.
2. Follow any audible instructions (depending on the Speeddial key's configuration, you may
be prompted to enter the Executive's number/extension and/or Destination number/exten-
sion manually using the phone's keypad).
The phone automatically dials the Destination number/extension.
3. When the call is answered, press the Push key to push the call to the Executive.
The phone enters in the FAC for the Clearspan Executive-Assistant Call Push feature and
automatically dials the FAC call. The FAC call is answered and the filtered call is released if
the push is successful.

FLASH

Your System Administrator can set a key to generate a flash event when it is pressed on the
6867i by setting the key to Flash. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when the call is not on hold).

ICOM (INTERCOM)

On the 6867i you can use the Icom key to automatically connect with a remote extension.
1. Press the Icom key.
69 | Mitel