treesse minipool Quarz Operating And Maintenance Manual page 80

Use
MESSAGES
CONNECTED TO DISPLAY SCREEN
THE SENSORS
Temperature
sensor not
accurate - M015
Temperature
sensor not
accurate - M026
Sensor fault -
Sensor A: M031,
Sensor B: M032
* this message can be deleted from the top of the panel by pressing any key.
VARIOUS TYPES
DISPLAY SCREEN
OF MESSAGES
No signal
Development
software (beta)
°F or °C are
replaced by °T
* this message can be deleted from the top of the panel by pressing any key.
EN
DESCRIPTION OF SIGNALS AND POSSIBLE SOLUTIONS
Problem description: the temperature sensors may be out of sync by
3°F. Call for Service.
Problem description: the temperature sensors ARE out of sync. The
Sensor Balance is Poor fault has been established for at least 1 hour.
Call for Service.
Problem description: A temperature sensor or sensor circuit has failed.
Call for Service.
DESCRIPTION OF SIGNALS AND POSSIBLE SOLUTIONS
Problem description: the control panel is not communicating with the
control unit. Call for Service.
Problem description: the control system is operating with test software.
Call for Service.
Problem description: the control system is in test mode. Call for Service.
80
Quarz
minipool