treesse minipool Quarz Operating And Maintenance Manual page 72

Use
HOLD (Standby)
Hold Mode –MO37*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter.
Hold Mode will last for 1 hour unless the mode is exited manually.
Drain Mode
Some spas have a special feature that allows a pump to be used when draining the water.
When available, this feature is a component of Hold Mode.
Drain Mode will time out with Hold Mode.
Main Screen
Press Menu/Select
repeatedly until
HOLD appears.
A few seconds
To next item
in Main Menu
OR
Key
Indicates a change in the display.
Indicates a continuous or intermittent message - every 1/2 second.
+
- A temperature button, used for "Action"
Menu/Select button
Waiting time that keeps the last change to a menu item.
Wait time in which the initial settings are restored
by cancelling the changes made.
Indicates a Menu Item that Depends on a Manufacturer Configuration and may or may not appear.
Main Screen
Press "Jets" Button for draining, only if Drain Mode is enabled.
Main Screen
or
a few seconds
EN
72
Quarz
minipool
Some spas have the
J
PUMPING OUT function (Drain Mode)
with the "Jets" button
"Jets" will toggle pump on and off.