treesse minipool Quarz Operating And Maintenance Manual page 68

Use
TEMPERATURE RANGE (INTERVALS)
This system incorporates two temperature range settings
with independent set temperatures. The High Range is
identified in the display by a thermometer and an "up"
arrow, and the Low Range is identified in the display by
a thermometer and "down" arrow.
These ranges can be used for various reasons, with
a common use being a "ready to use" setting vs. a
"holiday" setting. The Ranges are chosen using the
menu structure below. Each range maintains its own set
temperature as programmed by the user. This way, when
a range is chosen, the spa will heat to the set temperature
associated with that range.
For instance:
High range
might be set between 26°C and 40°C.
Low range
might be set between 10°C and 37°C.
More specific Temp Ranges may be determined by the
Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on page 19 for additional heating
control information.
The set temperature will flash
Main Screen
High range vs.
Low range
Toggles the Range arrows on the screen
To next item in Main Menu
The set temperature will flash
Main Screen
EN
Press a temperature button repeatedly to change it.
Pressing and holding a Temp Button will also change the temperature.
Main Screen
Set
*****
Wait a few
seconds to return to
the original setting
Press a temperature button repeatedly to change it.
Pressing and holding a Temp Button will also change the temperature
68
Quarz
minipool
Main Screen
OR
a few seconds
Main Screen
OR
a few seconds