Setting The Model Size - Viessmann Vitotronic SPS Service Instructions Manual

Configuration system
Buttons:
■ "BW30x / BW35x"
Selects a heat pump of type BW30x or BW35x
The "Selection size" page appears.
■ "BW35x Screw"
Selects a heat pump of type BW35x with rotary
screw compressor
■ "Reset configuration"
Note
Essential in the case of commissioning and reconfi-
guration.
To reconfigure the system. Configuration is reset to
the delivered condition and full initialisation takes
place.

Setting the model size

Note
Factory setting. This is required because certain heat
pump versions cannot be operated as single stage.
Fig. 8
(cont.)
■
One page earlier
"Main menu"
■
"Menu" page
Configuring the system
15