Diagnosis
System info
Call up with
■
å
"System info"
■
Fig. 36
The following information is displayed:
"Last operation"
■
Time of last operation.
Time format: hhmm
Date format: YYYYMMDD
■
"Most recent fault"
Time of most recent fault
"Model size"
■
Heat pump model size and series
■
"SW version"
Software version
"IP address"
■
Internet Protocol address of heat pump control unit
■
"Op. mode"
Mode of control (see table)
■
"SAIA FW version"
Firmware version of heat pump control unit
"SAIA P date"
■
Production date of heat pump control unit
Format: YYMM
■
"BACnet card"
Firmware version of BACnet card
For a description of BACnet, see page 42
60
"Op. mode"
"Autonom."
The heat pump controls all pumps
and buffer cylinders itself.
"External con-
The heat pump is controlled by a
trol"
higher ranking system.
"Cascade"
The heat pump is part of a linked
system of heat pumps. It is either
the slave of a heat pump or the
master of the other heat pumps.
Buttons:
"Start page"
■
Back to start page
■
"Menu"
Back to menu