Residual Heat Selection - Viessmann Vitotronic SPS Service Instructions Manual

Configuring the system
Configuration system

Residual heat selection

Fig. 14
Note
When selected, the button will turn green.
Buttons:
■ "Resid. heat"
Specifies whether the system has a residual heat
component
"Dry cooling and geothermal probes"
■
Heat is transferred to the dry cooler and the geother-
mal probes.
■ "Dry cooling"
The heat is only transferred to the dry cooler.
22
(cont.)
■ "Re-cooling via geoth. pr."
The heat is only transferred to the geothermal
probes.
■ "Confirm!"
Completing the system configuration
Note
The system configuration must be saved on the
"Configuration" page in order to take effect. See
page 12.