Configuration/Login; Entering The Password - Viessmann Vitotronic SPS Service Instructions Manual

Configuring the system

Configuration/login

Call up with
■
å
"Configuration"
■
Fig. 5

Entering the password

Some settings can only be changed after obtaining
authorisation by entering a password.
The password for contractors (service and commis-
sioning) is service545. Please note that the user name
and password are case-sensitive.
Note
The passwords for system users are pass123 and
passwd. Using passwd, all settings relating to the
heating and cooling circuits can be made.
After entering the password, the corresponding setting
level is displayed above the entry field.
12
Buttons:
"Configuration"
■
To change the system configuration.
■ "Save configuration"
From "SW version" "....R92" (see page 60), cer-
tain settings will take effect only once the configura-
tion has been saved.
"Reload configuration"
■
From "SW version" "0.96R93" (see page 60),
saved configurations from earlier versions can also
be loaded.
"Demo mode"
■
"Select language"
■
Language selection
■ "System"
System overview
■ "Start page"
Back to start page
"Menu"
■
Back to menu