EDID Management
Allows you to choose the EDID for each input.
Supports built-in and EDID copy modes.
There are 8 EDID groups.
EDID Configuration Mode Setup
The Matrix's default EDID is 4K@60Hz YUV 4:4:4 8-bit 2-
ch (0,0,0,1). Do Not make any changes if the default EDID
works properly.
1.
To change the EDID for Input 1, long press the
HDMI Out 1 Select button (on the Matrix's front
panel) for 1 second to enter EDID configuration
mode. Release the button when the HDMI Out 1
LED begin to flicker. Example: If only Input 1 LED
is flickering, it represents EDID Def1: 4K60Hz YUV
4:4:4 8-bit 2Ch (see Indicator status in EDID table on
page 9).
2.
Quick press the HDMI Out 1 Select button to choose
the EDID setting (see Indicator status in EDID table
on page 9). Example: If only Input 2 LED is flickering,
it represents EDID Def2: 4K60Hz YUV 4:2:0 8-bit
2Ch. Note: EDID switching sequence: Built-in EDID
> Copy EDID.
EDID Table
9
Need help?
Do you have a question about the Matrix44HD2-LT and is the answer not in the manual?