gofanco Matrix44HD2-LT User Manual page 8

5. All: Selects one input device to display on all outputs.
Example: Press All button, then press Input 1/2/3/
4 (see # 8)
6. PTP (Port to Port): Press to assign all inputs and
outputs to their numerical counterparts. Examples:
Input 1 to Output 1, Input 2 to Output 2, Input 3 to
Output 3, Input 4 to Output 4
7. X: Turn off output port. Example: To turn off
display on Output 1 - Press Output 1 button (see
#4), then press X. To turn on the display, press
Output 1 + X again
8. Input Select: Press to select input 1/2/3/4
9. Next: Switch to the next input device. Example: To
switch Output 1 to the next input device - Press
Output 1 button (see #4), then press >. Note: If the
next input device is inactive it will automatically
skip to the next active input device
10. Last: Switch to the previous input device. Example:
To switch Output 1 to the previous input device -
Press Output 1 button (see #4), then press <. Note:
If the previous input device is inactive it will
automatically skip to the next active input device
Note: All buttons support short press, long press function
is not supported.
8