Connecting The Film Digitizer; To The Power Cord; To The Hi-Speed Usb Cable - Microtek NDT-2000 User Manual

Connecting the Film Digitizer

To the Power Cord

1. Connect the power cord to the left side of the digitizer.
2. Plug one end of the power cord into a wall outlet or other power source.

To the Hi-Speed USB Cable

3. Connect one end of the Hi-Speed USB cable to your computer.
4. Connect the other end of the Hi-Speed cable to the digitizer's USB port,
24 NDT-2000 User's Manual
locating at the left side of the digitizer