Unpacking Your Film Digitizer; Looking For Damage; Unpacking Package Contents - Microtek NDT-2000 User Manual

Ndt/rt industrial film digitizer

Hide thumbs Also See for NDT-2000:

Table of Contents

Unpacking Your Film Digitizer

While unpacking your digitizer, inspect the shipping carton for any signs of

mishandling or damage. The digitizer's packing carton and padding material

have been carefully chosen to prevent damage to the unit in shipping and can

withstand a reasonable amount of pressure.

After unpacking your digitizer package, refer to the later section to ensure that

you received all of the parts necessary for digitizer setup. If there are any

damaged or missing parts, notify the shipper immediately or contact customer

service.

NOTE: Save the carton and all packing materials. If you need to ship the digitizer

later, it is recommended that you should repack it using the original wire ties,

plastic bags, foam supports and cartons, which protects your digitizer from

unnecessary damage. Refer to the later section "How to Repack Your Film

Digitizer for Shipping" for the detail.

After unpacking the shipping carton, follow the steps shown below to take out

your digitizer and other accessory components.

1. Ensure that you put the shipping carton

with the correct side up on a flat surface.

Then, lift up the top cover.

NDT-2000 User's Manual

Table of Contents

Do you have a question about the NDT-2000 and is the answer not in the manual?