GMC Elite Series Service Manual page 23

GM
Vending, s.a.
the machine will perform a cycle of the extractors, moving each one 50 times.
If you want to interrupt this cycle press REJECT until the machine finishes the
E l i t e 8
turn is it making and detects this push-button. The display will show the value
51. When it finishes the cycle, by pressing each channel of the machine you
will see the number of errors detected at the position and product switches of
the channel in question, separated by a full stop (e.g 23.12 23 errors position
switching and 12 errors in product switching). If the machine has been stopped
before finishing the movement with the REJECT and then channel 1, will start
the cycle again. To exit press PROGRAMMING. If you press REJECT again
the machine will be initialised (reset).
C:\manuales\Elite\inglés\ELITEing10-02.DOC Pág 23 de 49 Edición:09/02