Advertisement
GM
Vending, s.a.
• Reloading return tubes.
(OPTION IS ONLY ACTIVATED WHEN THERE IS A CHANGE GIVER IN THE
MACHINE AND IT IS OPERATING)
By entering this option all types of coins which do not go to the return tubes are
inhibited. You only have to introduce coins to reload the tubes. The tubes
reload until they fill up, at which time the coin is inhibited and its value flashes
on the display. While the flashing continues any coin introduced will be
inhibited. This process continues until all the tubes are full or the
PROGRAMMING key is pressed to go to the next option. The total sum of
money in the tubes appears at all times. If you wish to know the number of
each type of coin in the tubes, just press the first channels (p1-p4), depending
on the number of tubes in the cash box. The total sum of money introduced
can be seen by pressing the next push-button on the last tube (p4 or p5).
• Unloading return tubes and hoppers.
(OPTION IS ONLY ACTIVATED WHEN THERE IS A CHANGE GIVER IN THE
MACHINE AND IT IS OPERATING)
To unload the coins in the return tubes, just press the channels (3 or 4
depending on the change giver coin mechanism) located top right in the
machine. Each one represents a tube with a type of coin.
When you press one of these the number of coins in that tube appears on the
display, in addition to the number of tubes separated by a full stop (E.g. 100.1
100 coins in tube 1). To unload coins, just press on this channel again. The
change giver coin mechanism expels five coins each time. The display always
shows the number of coins remaining in the tube. The process can be repeated
until there is no coin left in the channel.
If you press 'PROGRAMMING' you move to the next programming option. If
you press another channel (containing a tube) the process is repeated. Once
all the coins are unloaded from the tubes you can only exit by pressing the
PROGRAMMING key.
If the machine has hoppers and these are activated, you can also unload these
with the channels next to the last tube (p4 and p5 or p5 and p6). In each case
the hopper will unload five coins and the display will indicate the total number
of coins unloaded.
• Deactivate visualisation of clock. (00.02)
• Activate visualisation of clock. (01.02)
In option 00.02 the clock is not visualised. Instead, the figure 0000 appears in
the display (while the machine is operating normally). To activate the
visualisation of the clock, just press 'REJECT' and the machine will change to
option 01.02. Within this option, in addition to allowing the visualisation of the
time in normal operation, we can see the hours and minutes on the clock. To
do this just press channel 1 (located top right in the machine). The hours and
minutes appear on the display with the minutes flashing. Channel 1 is used to
change the time 1, the minutes increasing as you press. If you press REJECT
the hours flash, you can increase in steps with channel 1 and decrease with
channel 2.
If you press REJECT again the current year flashes, and this can be changed
through channel 1 and 2.
Pressing REJECT once again, the current day and month appear. The day
flashes (change it with channel), pressing REJECT yet again will make the
month flash and this can be changed with channel 1 and 2. To exit this option,
press PROGRAMMING.
If you press REJECT instead of PROGRAMMING you start with hours and
minutes again.
• Programming of prices.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
Pág 11 de 49
Edición:09/02
Advertisement
