Advertisement
GM
Vending, s.a.
(OPTION IS ONLY ACTIVATED WHEN THERE IS A CHANGE GIVER IN THE
MACHINE AND IT IS OPERATING)
To program prices of products in each channel, enter programming option
00.03. When you press a channel the product price appears on the display. If
you do not wish to change it, just press any other channel so that the price of
the pressed channel appears, or alternatively press the PROGRAMMING
button. This takes you to the next option within the programming mode. If the
price of a channel flashes this means that it is de-programmed and that the
machine cannot sell it. To correct this de-programmed state just program the
price of that channel.
To change a price just press the appropriate channel a second time. The price
of that product goes to the value determined by the user via the REJECT key
(default value: 30 B.M.U.) and each time you press it the figure rises until it
reaches the required price. If another channel or the PROGRAMMING button
is pressed before changing the price the price of the channel which was being
changed will be the last figure to appear on the display.
If you want to determine the basic figure (from which price increases in a
channel will be made) just press the REJECT push-button at any time. The
current value appears. Next time you press it resets to zero and each time it is
pressed afterwards it increases until the required price is reached.
• Programming prices from the keyboard.
(OPTION IS ONLY ACTIVATED WHEN THERE IS A CHANGE GIVER IN THE
MACHINE AND IT IS OPERATING)
To program the prices of the products in each channel, enter programming
option 01.03. By pressing a channel the price of the product appears on the
display. If you do not wish to change the price, just press any other channel so
that the price of the pressed channel appears, or press the PROGRAMMING
button. This will take you to the next option in the programming mode.
To change a price just press a number of up to 8 digits on the small keyboard.
Erase the last key pressed with the letter 'C'. Once the new price is entered it is
stored, so you can change channel or exit the option with the PROGRAMMING
push-button. If the number entered is not a multiple of the scale factor of the
change giver coin mechanism it is cancelled and the previous value remains. If
values are entered with decimals, zeros at the end should also be entered.
• Programming of prices with money.
(OPTION IS ONLY ACTIVATED WHEN THERE IS A CHANGE GIVER IN THE
MACHINE AND IT IS OPERATING)
To program the prices of the products in each channel in this option, just enter
the price of a product (it is best to start with the lowest price). The display will
show the value entered at all times and the machine will return the inserted
coin. Any price shown on the display can be stored in any of the channels
simply by pressing the corresponding push-buttons.
To exit, just press the PROGRAMMING push-button.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
Pág 12 de 49
Edición:09/02
Advertisement
