Advertisement
GM
Vending, s.a.
Advice Codes.
Switch off and on the machine.
If the display flashes, press the programming push-button while the display flashes and test if the
problem has disappeared.
If it doesn't work yet, the following list shows you the messages the machine can show in the
CODIGO
Indicates that some of the prices have been de-programmed.
Press PROGRAMMING so that the machine can try and correct the error. This assigns a
default prices to the channels in the machine that are not being used (1000 B.M.U.). If the
error persists it should be corrected in 'programming of prices'.
To find out which channel is the one that is de-programmed just press each push-button
within option 00.03 to know its price. If a channel is de-programmed its price flashes.
Indicates a de-programming of the codes assigned to each channel
To get the machine to try and correct the error, press PROGRAMMING. This assigns the
value '0' to the channels that are not being used in the machine. If the error persists it
should be corrected in code programming mode.
Indicates a de-programming in the channel connections.
To get the machine to try and correct the error, press PROGRAMMING. This 'de-assigns'
the motors of the de-programmed push-button i.e. that push-button will not move any
extractor.
Indicates a de-programming of the type of machine (8, 12, 16 ,24 channels).
To get the machine to try and correct the error, press PROGRAMMING. This corrects the
error and detects the type of machine again.
If one of the key motors is out of position it will detect an 'erroneous' machine type.
Indicates a de-programming of the type of sale of the machine
To get the machine to try and correct the error, press PROGRAMMING. This corrects the
error, leaving it as it was the last time. If, for any reason, the machine cannot reconstruct
the previous value it will leave it as a single sale.
Indicates a de-programming of the sales data of the machine.
To get the machine to try and correct the error, press PROGRAMMING. This resets the
sales data value that does not coincide.
Indicates that extractor number XX is faulty.
To get the machine to try and correct the error, press PROGRAMMING. This eliminates
the fault from this extractor provided it is not physically damaged.
Indicates that the REJECT push-button remains continuously pressed.
To correct the error open the machine and see what has not been pressed.
Indicates that the flap that drops the coins to cash box is not working.
This failure means that the change giver coin mechanism does not accept any coins.
The machine will try to correct the error each time REJECT is pressed and there is not
credit on the display. It will also attempt this each time the machine starts up, provided
that option 16 is at value 01.16 or 02.16.
Indicates that the falp that drops the coins to return cap is not working.
This failure means that the change giver coin mechanism does not accept any coins.
The machine will try to correct the error each time REJECT is pressed and there is not
credit on the display. It will also attempt this each time the machine starts up, provided
that option 16 is at value 02.16.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
display to help you to solve the problem.
DESCRIPICION DE LA AVERIA
Pág 24 de 50
.
.
Edición:09/02
Advertisement
