Advertisement
GM
Vending, s.a.
The programming push are the elements that allow us check and insert the
information when a programming operation is done. Example: change the price of
products.
Reject
Push Button
• Programming Push Button. This push is in the display board, inside the door. This push has
two functions:
1 Enter and exit of programming mode.
2 Change of programming option.
• Reject Push Button. Is below the coin insert canal. Its function is change the value of
programming options.
• Selection Push Button. Its function is the same that reject push button, cahnge the value of
aprogramming options.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
PROGRAMMING PUSH
Pág 10 de 49
Programm
Push Button
ing
Selection Push
P1-P2-P3-P4
Edición:09/02
Advertisement
