Advertisement
GM
Vending, s.a.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
•
programming coin value
Desactivate
• Activate programming coin value.
(THIS OPTION IS ONLY ACTIVATED WHEN THERE IS A VALIDATOR IN THE
MACHINE AND IT IS OPERATING)
Allows us to change the value of the coins accepted by the coin selector,
modify the number of decimals, choose the language for display messages
and determine the inhibition level of the validator.
If p1 (pushbutton 1) appears on the display "COIN" the machine is ready to
receive coins. Insert one of the coins accepted by the validator (if it is not
accepted, check the validator inhibition level, pressing the coin return
pushbutton, it will change between "HIGH" and "LOW"), the value will appear
on the display with the previously-assigned decimals.
If you wish to change the assigned value, press pushbuttons according to the
following list:
p1: changes the value of the 1st digit (e.g.: "0200", "0201", "0202"...)
p2: changes the value of the 2nd digit (e.g.: "0200", "0210", "0220"...)
p3: changes the value of the 3rd digit (e.g.: "0200", "0300", "0400"...)
p4: changes the value of the 4th digit (e.g.: "0200", "1200", "2200"...)
With the first validation all other values will be set to 0. Therefore the values of
all the coins to be accepted by the validator have to be programmed.
If you want to change the number of decimals, press the appropriate
pushbutton as per the following list:
p5: no decimals (e.g.: "0200")
p6: one decimal (e.g.: "020.0")
p7: two decimals (e.g.: "02.00")
p8: three decimals (e.g.: "2.000")
To change the language press p1 until the desired language appears on the
display.
• Turn off modem (00.28)
• Turn on modem. Programming telephone number (01.28)
This option is used to turn the modem on and to enter the phone number it
should call (maximum 15 digits). To turn it on coin return is pressed and the
option switches to 01.28.
Once turned on it can be entered through p1 to programme the telephone
number. The phone number appears in 4-digit groups. each digit can have a
blank value (no number), a hyphen "-" and values from 0 to 9.
The first four pushbuttons are used to increase the 4 digits seen on the
display. The next three pushbuttons are used to select each of the 4-digit
groups in the 15-digit phone number.:
p8--------> -123
p7--------> -xxx
p6--------> -xxx
p5-------->
Once the phone number has been entered press coin return to validate it and
the number will appear on the display.
To exit this option press the programming button.
Pág 21 de 49
.
Group 1
Group 2
xxxx
4567
xxxx
||||
||||
-ppp
pppp
-321
4321
Group 3
Group 4
xxxx
xxxx
xxxx
xxxx
8901
xxxx
||||
2345
pppp
pppp
4321
4321
Edición:09/02
Advertisement
