Advertisement
GM
Vending, s.a.
C:\manuales\Elite\inglés\ELITEing10-02.DOC
00.13: Only
sale at exact
price
550
550
01.13:
Change is not
returned
02.13:
Maintain
change
temporarily
on the display
03.13:
Maintain
change
permanently
on the display
To exit this option and pass to the next one while storing the value, press
PROGRAMMING. The stored value is the last one indicated on the display.
Remember that in 'multiple sales' there is no exact price, so in this option the
machine automatically goes to 'Sale registering credit temporarily' at 02.13. If
you change to single sale this option stays at the value left for multiple sale.
• Programming of obliged sale.
When you enter this option, the display shows the value 0X.14. X represents
the current option i.e. an obliged sale.
Each time REJECT is pressed the type is changed according to the following
table:
00.14: No obliged sale. Money can be recovered if there is change in
the tubes.
01.14: Obliged sale. Money cannot be recovered if a sale is not
made.
To exit this option and pass to the next one, storing the value, press
PROGRAMMING, The stored value is the last one indicated on the display.
Pág 17 de 49
550
550
550
+
550
+
Edición:09/02
Advertisement
