Safety Measures - Vitek VT-2338 Manual Instruction

HUMIDIFIER VT-2338
Insufficient room humidity negatively affects
humans' and pets' health as well as plants and
furniture. The recommended comfortable room
humidity level is from 40% to 60%.
The humidifier allows you to improve the air qual-
ity in the room.
DESCRIPTION
1. Lid with mist release nozzle
2. Water tank carrying handle
3. Water tank
4. Mineral filter
5. Water tank lid
6. Brush for cleaning the «sprayer»
7. Process chamber with «sprayer»
8. Control panel
9. Body
9а. Air inlet grid and foam filter
10. Power cord
Control panel (8)
11. "ON/OFF" button
12. "MIST" button
13. "HUMIDI STAT" button
14. Relative humidity/temperature/delayed start
time/auto switch-off time digits
15. "DELAY START" button
16. "AUTO OFF" button
17. Time/relative humidity symbols "H, %"
18. Temperature measurement unit symbols «C°, F°»
19. "ANION" button
20. "Ionization" mode active symbol
21. Mist release intensity symbols
22. "Auto switch-off" mode active symbol
23. Maintaining relative humidity mode active
symbol
24. "Delayed start" mode active symbol
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install RCD,
contact a specialist.

SAFETY MEASURES

Before using the electrical unit, read this instruc-
tion manual carefully and keep it for future refer-
ence.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to his/her property.
IM VT-2338.indd 3
•
Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
•
Place the unit on a flat, moisture-resistant sur-
face. The distance to the walls, other furniture
and interior objects should be at least 30 cm.
•
Do not place the unit on carpet surfaces with
high pile.
•
Do not place the air humidifier in places exposed
to direct sunlight, high temperatures, near com-
puters or other sensitive electronic appliances.
•
Do not use the unit outdoors.
•
Use the supplied removable parts only.
•
Do not operate the unit without water; switch the
unit off when the water tank is empty.
•
Do not use soda or dirty water or any perfume
additives.
•
Water temperature should not exceed +40°С.
•
Do not switch the unit on if the water tank is not
installed.
•
Unplug the unit before removing the water tank.
•
Do not cover the unit.
•
Do not cover the openings on the unit body and
avoid getting of foreign objects inside them.
•
Do not immerse the unit body, the power plug or
the power cord into water or any other liquids.
•
Do not move or tilt the unit during the operation
and do not remove the water tank.
•
Always unplug the unit and pour out water from
the water tank and the process chamber before
cleaning or if you do not use the air humidifier.
•
Before moving the unit to another place, unplug
it and pour out water from the water tank and the
process chamber. When carrying the unit, hold it
by the body with both hands.
•
Do not touch the power plug with wet hands.
•
Clean the unit regularly.
•
Do not allow children to touch the unit body and
the power cord during operation.
•
This unit is not intended for usage by children.
•
The unit is not intended for usage by physically
or mentally disabled persons (including children)
or by persons lacking experience or knowledge
if they are not under supervision of a person who
is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
3
ENGLISH
22.11.2018 10:51:50