Safety Measures - Vitek VT-2349 Manual Instruction

HUMIDIFIER VT-2349
Insufficient room humidity negatively affects
humans' and pets' health as well as plants and
furniture. The recommended comfortable room
humidity level is from 40% to 60%.
The humidifier allows you to improve the air qual-
ity in the room.
DESCRIPTION
1. Upper lid
2. «Mist» release nozzle
3. Water tank
4. Aromatic oil container
5. Control panel with digital display
6. Power cord
7. Process chamber with ultrasonic sprayer
8. UV lamp
9. Float (water overflow protection of the process
chamber)
10. Water level sensor
11. Air pipe
12. Remote control (RC)
Control panel with digital display and RC
13. ON/OFF button
14. «Mist» release intensity selection button
15. UV lamp on/off button
16. «Night» mode on/off button
17. Timer setting button
18. Relative humidity setting button
Digital display
19. Low water level icon
20. «Mist» release intensity scale
21. Relative humidity digital symbols
22. Timer digital symbols
23. UV lamp on symbol
24. Night mode on symbol
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install RCD,
contact a specialist.

SAFETY MEASURES

Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to his/her property.
•
Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
IM VT-2349.indd 3
•
Place the unit on a flat, moisture-resistant sur-
face. The distance to the walls, other furniture
and interior objects should be at least 30 cm.
•
Do not place the unit on carpet surfaces with
high pile.
•
Do not place the air humidifier in places exposed
to direct sunlight, high temperatures, near com-
puters or other sensitive electronic appliances.
•
Do not use the unit outdoors.
• Use the supplied removable parts only.
•
Do not operate the unit without water; switch the
unit off when the water tank is empty.
• Do not use soda or dirty water or any perfume
additives.
•
Water temperature should not exceed +40°С.
• Do not switch the unit on if the water tank is not
installed.
•
Unplug the unit before removing the water tank.
• Do not cover the unit.
•
Do not cover the openings on the unit body and
avoid getting of foreign objects inside them.
•
Do not immerse the unit body, the power plug or
the power cord into water or any other liquids.
• Do not move or tilt the unit during the operation
and do not remove the water tank.
•
Always unplug the unit and pour out water from
the water tank and the process chamber before
cleaning or if you do not use the air humidifier.
•
Before moving the unit to another place, unplug
it and pour out water from the water tank and the
process chamber. When carrying the unit, hold it
by the body with both hands.
• Do not touch the power plug with wet hands.
•
Clean the unit regularly.
•
If you are not planning to use the remote control
for a long time, remove the battery from the bat-
tery compartment.
•
Strictly follow the polarity according to the mark-
ings when installing the battery.
•
Replace the batteries in time.
• Do not allow children to touch the unit body and
the power cord during operation.
•
This unit is not intended for usage by children.
• The unit is not intended to be used by peo-
ple with physical, sensory or mental disabilities
(including children) or by persons lacking expe-
rience or knowledge if they are not under super-
vision of a person who is responsible for their
safety or if they are not instructed by this person
on the usage of the unit.
•
Do not leave children unattended to avoid them
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
3
ENGLISH
7/30/20 11:59 AM