Safety Measures - Vitek VT-2342 Manual Instruction

HUMIDIFIER VT-2342
Insufficient room humidity negatively affects
humans' and pets' health as well as plants and
furniture. The recommended comfortable room
humidity level is from 40% to 60%.
The humidifier allows you to improve the air qual-
ity in the room.
DESCRIPTION
Lid with mist release nozzle
1.
Water tank carrying handle
2.
Water tank
3.
Mineral filter
4.
Water inlet
5.
Water tank lid
6.
Process chamber with «sprayer»
7.
Control panel
8.
Body
9.
Air inlet grid and foam filter
10.
Control panel (8)
"ON/OFF" button
11.
«Mist» release intensity button «MIST»
12.
Relative air humidity setting button
13.
«HUMIDI STAT»
Relative humidity/temperature/delayed
14.
start time/auto switch-off time digits
Delayed start time setting button
15.
«DELAY START»
Auto switch-off time setting button «AUTO OFF»
16.
Time/relative humidity symbols "H, %"
17.
Temperature measurement unit symbols «C°, F°»
18.
Ionization mode on button «ANION»
19.
"Ionization" mode active symbol
20.
Mist release intensity symbols
21.
"Auto switch-off" mode active symbol
22.
Maintaining relative humidity mode active
23.
symbol
"Delayed start" mode active symbol
24.

SAFETY MEASURES

Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to his/her property.
•
Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
•
Place the unit on a flat, moisture-resistant sur-
face. The distance to the walls, other furniture
and interior objects should be at least 30 cm.
IM VT-2342.indd 3
•
Do not place the unit on carpet surfaces with
high pile.
•
Do not place the air humidifier in places exposed
to direct sunlight, high temperatures, near com-
puters or other sensitive electronic appliances.
•
Do not use the unit outdoors.
•
Use the supplied removable parts only.
•
Do not operate the unit without water; switch the
unit off when the water tank is empty.
•
Do not use soda or dirty water or any perfume
additives.
•
Water temperature should not exceed +40°С.
•
Do not switch the unit on if the water tank is not
installed.
•
Unplug the unit before removing the water tank.
•
Do not cover the unit.
•
Do not cover the openings on the unit body and
avoid getting of foreign objects inside them.
•
Do not immerse the unit body, the power plug or
the power cord into water or any other liquids.
•
Do not move or tilt the unit during the operation
and do not remove the water tank.
•
Always unplug the unit and pour out water from
the water tank and the process chamber before
cleaning or if you do not use the air humidifier.
•
Before moving the unit to another place, unplug
it and pour out water from the water tank and the
process chamber. When carrying the unit, hold it
by the body with both hands.
•
Do not touch the power plug with wet hands.
•
Clean the unit regularly.
•
Do not allow children to touch the unit body and
the power cord during operation.
•
This unit is not intended for usage by children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
•
Never pull the power cord when disconnecting
the unit from the mains; take the power plug and
carefully pull it out of the mains socket.
•
If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance
3
ENGLISH
11.06.2019 16:31:31