Safety Measures - Vitek VT-2350 Manual Instruction

Hide thumbs Also See for VT-2350:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
HUMIDIFIER VT-2356
Insufficient room humidity negatively affects
humans' and pets' health as well as plants and
furniture. The recommended comfortable room
humidity level is from 40% to 60%. The air humidi-
fier allows improving the air quality in the room.
DESCRIPTION
1. Lid with «mist» release opening
2. Water tank
3. «МАКС» water level mark
4. Air pipe
5. Control panel
6. Body
7. Process chamber
8. Float (stabilizes the water level
in the process chamber)
9. Water «sprayer»
10. Water level sensor
11. Night illumination lamp
Control panel
12. Mist release intensity indicators:
«
» – high intensity indicator
«
» – low intensity indicator
13. Timer operation indicators «2, 4, 8»
14. Sleep mode on indicator
15. «Mist» release on/off/intensity control
button «
»
16. Timer on/off button «
17. Night illumination on button «
18. Sleep mode on/off button «

SAFETY MEASURES

Before using the electrical unit, read this instruc-
tion manual carefully and keep it for future refer-
ence.
Use the unit for its intended purpose only, as spec-
ified in this manual. Mishandling of the unit may
lead to its breakage and cause harm to the user or
damage to his/her property.
Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
Place the unit on a flat, moisture-resistant
surface. The distance to the walls, other fur-
niture and interior objects should be at least
30 cm.
Do not place the unit on carpet surfaces with
high pile.
Do not place the air humidifier in places
exposed to direct sunlight, high temperatures,
near computers or other sensitive electronic
appliances.
Do not use the unit outdoors.
Use the supplied removable parts only.
»
»
»
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
3
ENGLISH
Do not operate the unit without water; switch
the unit off when the water tank is empty.
Do not use soda or dirty water or any perfume
additives.
Water temperature should not exceed +40°С.
Do not switch the unit on if the water tank is not
installed.
Unplug the unit before removing the water tank.
Do not cover the unit.
Do not cover the openings on the unit body and
avoid getting of foreign objects inside them.
Do not immerse the unit body, the power plug
or the power cord into water or any other liq-
uids.
Do not move or tilt the unit during the operation
and do not remove the water tank.
Always unplug the unit and pour out water from
the water tank and the process chamber before
cleaning or if you do not use the air humidifier.
Before moving the unit to another place, unplug
the unit and drain the water from the process
chamber. When carrying the unit, hold it by the
body with both hands.
Do not touch the power plug with wet hands.
Clean the unit regularly.
Do not allow children to touch the unit body and
the power cord during operation.
This unit is not intended for usage by children.
The unit is not intended to be used by peo-
ple with physical, sensory or mental disabili-
ties (including children) or by persons lacking
experience or knowledge if they are not under
supervision of a person who is responsible for
their safety or if they are not instructed by this
person on the usage of the unit.
Do not leave children unattended to avoid them
using the unit as a toy.
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Never pull the power cord when disconnecting
the unit from the mains; take the power plug
and carefully pull it out of the mains socket.
Never use the unit if the power cord or the
power cord plug is damaged, if the unit works
improperly or after it was dropped.
If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance
service or similar qualified personnel to avoid
danger.
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service

Advertisement

Table of Contents
loading

Table of Contents