Table of Contents
Advertisement
9
TTY Interface
The TTY interface is the BVM's built-in interface for basic configuration. From the TTY interface, you
can:
Edit the IPA, subnet, and gateway
Set unit back to factory defaults
For more advanced configuration tools, please use the Web Browser Interface.
For Telnet, connect to the IP address at port 2002 to access the configuration menus after initial LAN/
WAN setup. Telnet sessions are established at port 2002, not the standard Telnet port as an
added security measure.
Menu Shortcut Keys
The letters before or enclosed in parentheses () are menu shortcut keys. Press the shortcut key to
access that option. Pressing the ESC key will always bring you back to the previous level. Entries are
not case sensitive.
9.1
Set DCP Parameters
1. Login to the TTY interface and press C)onfig > D)CP.
2. Set the DCP Address (Unit ID).
3. Set the DCP listening type (toggle through the options). Choose over serial, over LAN*, or disabled.
Note: If not using DCP to communicate with a DPS master, set the address to 0 and disable
listening.
Set DCP info for T/Mon polling
Debug and troubleshoot
Fig. 9.1 - Setting DCP Parameters
13
Advertisement
Table of Contents
Need help?
Do you have a question about the BVM 48 and is the answer not in the manual?
Questions and answers