Unable to configure netguardian ip address via usb craft port (10 pages)
Summary of Contents for DPS Telecom T/Mon LNX
Page 1
Techno Knowledge Paper “Your Partners in Network Alarm Management” Problem: Setting up a NetGuardian for Dial-up backup to a T/Mon Platform: T/Mon LNX Setting up a NetGuardian to report alarms over a dialup connection to a T/Mon. This techno knowledge paper can help you if: •...
Page 2
DPS Telecom Techno Knowledge Paper “Your Partners in Network Alarm Management” Troubleshooting Checklist A) Setup a TRIP port 1. Identify a modem port 2. Database the port as a TRIP Port a. From the master menu, select Parameters, Remote Ports.
Page 3
DPS Telecom Techno Knowledge Paper “Your Partners in Network Alarm Management” B) Add the TRIP port as the NetGuardian’s dial up port 1. Navigate to the NetGuardian Definition page a. From the Master Menu, select Files, LAN-based Remotes, NetGuardian. b. Press ‘F’ for Find c.
Page 4
DPS Telecom Techno Knowledge Paper “Your Partners in Network Alarm Management” for field explanations. c. Next hit F1 for devices and verify that the firmware version of the NetGuardian added to the T/Mon. 4. Return to the Master Menu a. Select Quit 3 times to return to the Master Menu.
Page 5
4. Reboot the unit to apply the changes. a. Click the ‘Reboot’ link in the left hand pane. b. Close the web browser session. _________________________________________________________________________ If you continue having trouble, please contact DPS Telecom tech support at (559) 454-1600 or support@dpstele.com. _____________________________________________________________________________...
Need help?
Do you have a question about the T/Mon LNX and is the answer not in the manual?
Questions and answers